Wright's Parts
Wright's is now producing and selling the following parts for Winchester Model 12, Model 42, & Super X-1 shotguns.
In order to save both you and us time, we are placing item numbers to the right of the list. When you order these parts, tell us the item number. This is not the actual item number, and any part that is the same is coincidence.
|
Description |
Wholesale* |
Retail |
Item # |
| Winchester Model 12 Competition Screw Kit: Contains 2 ea. magazine plug screws, 2 ea. magazine band screws and 1 trigger guard screw. Made to factory specifications as to finish, color, and hardness. Replace those worn and burred screws. | |||
 Model 12 Screw
Kit
|
N/A |
$15.00 |
1 |
| Master Kit (Includes 5 of the above kit) |
$60.00 |
$75.00 |
2 |
| Winchester Model 12 Competition Spring Kit: 1 ea. trigger return*, L.H. extractor*, R.H. extractor, retractor and hammer springs. Every Model 12 out there has tired or worn out springs. With the installation of these Competition quality springs you put new life and performance into the gun. Install a kit in each Winchester Model 12 you service or own. * identical parts | |||
 Model 12 Competition
Spring Kit
|
N/A |
$15.00 |
3 |
| Master Kit (Includes 5 of the above kit) |
$60.00 |
$75.00 |
4 |
 Model 12 Factory
Firing Pin |
$20.00 |
$25.00 |
5 |
| Winchester Model 12 Competition Lock Springs: Replace broken or weak action slide lock springs to re-establish that crisp 'click' of the lock during firing. If your customer is complaining of hang fires or the gun will not fire when trigger is pulled but will discharge if he wiggles the forearm, replace the lock springs. Highest quality spring steel available. Install a pair with each trigger job to enhance performance. | |||
| Model 12 Competitive Lock Springs (per pair) |
N/A |
$5.00 |
6 |
| Master Kit ( 5 pairs) |
$20.00 |
$25.00 |
7 |
| Winchester Model 12 Competition Hammer Spring Kit: Contains 1 hammer spring and 1 trigger spring. If the Model 12 you are bluing, repairing, or tuning up is over 5 years old (they all are), the hammer spring has probably taken a set. Any quality trigger job has to start with a top quality hammer and trigger spring. This spring combination will decrease lock time by 1/3 and possibly as much as 1/2. Used by Competition Shooters for years. | |||
| Model 12 Competitive Hammer & Trigger Spring Kit |
N/A |
$5.00 |
8 |
| Master Kit (5 of each) |
$20.00 |
$25.00 |
9 |
 Model 42 Screw
Kit
Includes 2 sideplate screws, 1 Magazine Plug Screw, and 1 Magazine Band Screw |
N/A |
$12.00 |
10 |
| Model 42 Master Kit (5 screw kits) |
$48.00 |
$60.00 |
11 |
| Super X Model 1 Bolt Buffers: If you have a Super X Model 1 or a customer brings one in for service, chances are that the bolt buffer is gone, brittle, broken, or shot out. If the bolt buffer is not operating as designed the gun will have ejection or feeding problems, not to mention eventually a broken receiver. The original factory buffers are a nylon material that ages or deteriorates.. These Magnum buffers are a new neoprene material that takes the beating of high power loads, and stands the test of time. Replacing the 'O' ring will cure many cycling problems as well. | |||
| Super X-1 Magnum Bolt Buffer & O-ring |
N/A |
$19.95 |
12 |
| Master Kit (5 buffers) |
N/A |
$79.95 |
13 |
Super X-1 Rebound Tube (Stainless steel and assembly) |
$75 |
$95.00 |
14 |
| Super X-1 Magnum Rebound Follower (Steel) |
N/A |
$20.00 |
15 |
| Master Kit (5 followers) |
$79.95 |
$99.95 |
16 |
| Super X-1 'O' Ring ( will fit Remington 1100's) |
N/A |
$1.50 |
17 |
| Master Kit (5 O-rings) |
$4.00 |
$5.00 |
18 |
| Super X-1 Magnum Rebound Spring |
$7.00 |
$10.00 |
19 |
| Super X-1 Magnum Hammer Spring |
$3.00 |
$4.00 |
20 |
| Super X-1 Magnum
Spring Kit
Kit includes both the Hammer and Rebound Springs |
$10.00 |
$14.00 |
21 |
|
Super X-1 Magnum Electro-less Nickeled Magazine Tubes |
N/A |
$40.00 |
22 |
|
Super X-1 Magnum Stainless Magazine Tubes |
N/A |
$40.00 |
23 |
|
Kit includes: Mag. Tube, Rebound Spring, Hammer Spring, Bolt Buffer, Follower, and O-Ring |
$76.00 |
$94.50 |
24 |
| Shell Catcher |
$15.00
|
$20.00
|
25 |
 Allen Timney Perazzi Firing Pin
#5113 TM or TMX Firing Pin w/ #118 Firing Pin Return Spring |
N/A
|
$30.00
|
26 |
 Allen Timney Perazzi Top and Bottom Firing Pins
#113 Top Firing Pin, #114 Bottom Firing Pin w/ two (2) #118 Firing Pin Return Springs |
N/A
|
$50.00 (as set)
|
27 |
| In order to save both you and us time, we are placing item numbers to the right of the list. When you order these parts, tell us the item number. This is not the actual item number, and any part that is the same is coincidence. |
* To receive Wholesale prices, total order must exceed $250.00
All pricing is subject to change without notice, for current pricing call or e-mail us.
(618) 357-8933
Super X-1 Tune-up Kit